Soakz Top Gel

The Soakz Top Gel is a gel that is applied over the nail after placing one or two layers of Soakz Gel Lacquer to give a high gloss to the nail and to seal the gel polish nail properly.

Use on natural nails:

1. Prepare the nail by pushing back the cuticles using the cuticle pusher. Then you will remove the shine from the nail surface without applying any pressure using a 180/180 grit file. Make sure that all shine is gone (make sure that all sides of the nail are also properly touched).
2. Now apply a layer of Nail Degreaser from the cuticle to the top of the nail (free edge) or on the part that has grown out. Nail degreaser ensures that all excess fats are removed from the nail plate, the moisture is removed from the nail surface and the nail is thoroughly cleaned.
3. If, despite good preparation, you still suffer from air edges, for example due to the use of medication, a too greasy nail plate, etc., it is wise to apply another layer of Acid Free Primer (acid free primer).
4. Now you proceed to apply a thin layer of Soakz Basegel (Adhesion Gel), where it is necessary to seal the top of the nail (the free edge) well. Cure the gel for 10 seconds under a LED lamp or one minute under a normal UV lamp (9 Watt).
5. Now apply a thin layer of Soakz Gel Lacquer, again sealing the top of the nail (free edge) well. Cure the gel for 30 seconds under a LED lamp or 2 minutes under a normal UV lamp. For a more intense color, repeat the procedure.
6. Now apply a thin layer of Soakz Top Gel. Cure it for 30 seconds under a LED lamp or 2 minutes under a normal UV lamp.
7. Now remove the adhesive layer using a sponge and Soakz Cleaner.
8. Finish the treatment by massaging the tip of the finger and nail with Cuticle Oil.

Use on artificial nails:

1. Remove the shine from the artificial nail using a 180/180 grit file. Then apply a thin layer of Soakz Gel Lacquer, sealing the top of the nail (free edge) well. Cure the gel for 30 seconds under a LED lamp or 2 minutes under a normal UV lamp. For a more intense color, repeat the procedure.
2. Finish the treatment by applying a thin layer of Soakz Top Gel. Cure it for 30 seconds under a LED lamp or 2 minutes under a normal UV lamp.
3. Now remove the adhesive layer using a sponge and Soakz Cleaner.
4. Finish the treatment by massaging the tip of the finger and the nail with Fast Nailz Cuticle Oil.

Content : 15 ml or 50 ml